Eager Polymers, Inc.

 

MATERIAL SAFETY DATA SHEET

 

PRODUCT NAME: RTV1000 & Castomold SR-TS Part A

_____________________________________________________________________________________

 

SECTION I - PRODUCT IDENTIFICATION

_____________________________________________________________________________________

 

From:

Eager Polymers

3350 W. 48th Place

Chicago, IL 60632

773-927-3484 Phone


Back to our homepage at: www.eagerpolymers.com

 

PRODUCT NAME: RTV 1000 & Castomold SR-TS Part A

_____________________________________________________________________________________

 

SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

_____________________________________________________________________________________

 

INGREDIENTS CAS # EXPOSURE LIMITS

 

Organo-tin compounds 0.1 mg/m3 as tin

Ethyl silicate 78-10-4 10 ppm

Polymeric ethyl silicate 68412-37-3 N.A.

_____________________________________________________________________________________

 

SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS

_____________________________________________________________________________________

 

BOILING POINT: N.A..* SPECIFIC GRAVITY : 0.99

VAPOR PRESSURE (mm Hg.): N.A. MELTING POINT: N.A.

VAPOR DENSITY (AIR=1): N.A. EVAPORATION RATE (Butyl Acetate=1): N.A.

SOLUBILITY IN WATER: Slight

APPEARANCE AND ODOR: Blue liquid. Mild alcohol-like odor.

_____________________________________________________________________________________

 

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

_____________________________________________________________________________________

FLASH POINT: 230 F FLAMMABLE LIMITS: N.A. LEL: N.A.

(ASTM D-1310, Open Cup) UEL: N.A.

 

EXTINGUISHING MEDIA: Carbon dioxide, sand, foam, dry chemicals

 

SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear full protective clothing, including self-contained breathing apparatus.

 

UNUSUAL FIRE AND EXPLOSION HAZARDS: Organo-tin fumes may be evolved.

 

 

- 1 -

PRODUCT NAME: RTV1000 & Castomold SR-TS Part A

______________________________________________________________________________

 

SECTION V - REACTIVITY DATA

______________________________________________________________________________

STABILITY: STABLE

CONDITIONS TO AVOID: N.A.

INCOMPATIBILITY (materials to avoid): Acids, bases and water.

 

HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Ethanol, silicon dioxide, carbon dioxide, and organo-tin compounds.

HAZARDOUS POLYMERIZATION: WILL NOT OCCUR

CONDITIONS TO AVOID: N.A.

______________________________________________________________________________

 

SECTION VI - HEALTH HAZARD DATA

______________________________________________________________________________

ROUTES OF ENTRY: INHALATION? YES SKIN? YES INGESTION? NO

HEALTH HAZARDS (acute & chronic): Eye and skin irritant. Temporary irritation of respiratory tract may occur.

CARCINOGENICITY: NTP? NO IARC MONOGRAPHS? NO OSHA REGULATED? NO

SIGNS AND SYMPTOMS OF EXPOSURE: Overexposure via inhalation or skin absorption may cause headache and nausea. May irritate eyes and skin on contact. Inhalation of vapors may irritate the respiratory tract.

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known to date.

EMERGENCY AND FIRST AID PROCEDURES: Eye Contact: Flush eyes with large quantities of water for at least 15 minutes. Consult a physician. Skin Contact: Wash thoroughly with mild soap and water. Remove contaminated clothing. Inhalation: Remove to fresh air.

______________________________________________________________________________

 

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

______________________________________________________________________________

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Cover spill with an absorbent material such as sand or sawdust. Scoop up and place in an appropriately marked container.

WASTE DISPOSAL METHOD: May be incinerated or land-filled under conditions complying with federal, state, and local environmental control regulations.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep containers tightly closed and air-tight. Protect from moisture. Store in temperatures less than 80 F. Store away from food and beverages.

OTHER PRECAUTIONS: Blanket vapor space with nitrogen for prolonged storage.

______________________________________________________________________________

 

SECTION VIII - CONTROL MEASURES

______________________________________________________________________________

RESPIRATORY PROTECTION: If TLV is exceeded, use MSHA/NIOSH organic vapor respirator.

VENTILATION: LOCAL EXHAUST: Preferred SPECIAL: N.A.

MECHANICAL: Acceptable OTHER: N.A.

PROTECTIVE GLOVES: Rubber EYE PROTECTION: Safety goggles

OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Rubber apron, eye wash fountain, safety shower.

WORK/HYGIENIC PRACTICES: Wash hands immediately after use.

PREPARED BY: MV DATE: 9/30/13



* N.A. throughout this document represents "Not Applicable".