MATERIAL SAFETY DATA SHEET

 

-----------------------------------------------------------------------

SECTION 1 - MATERIAL IDENTIFICATION

-----------------------------------------------------------------------

 

PRODUCT NAMES

 

EP5345 Activator

EP5347 Activator

EP7120 Activator

EP7140 Activator

EP9053 Activator

 

 

MSDS REVISION NUMBER 9

 

FROM Eager Polymers

3350 W. 48th Place

Chicago, IL 60632

www.eagerpolymers.com/msds.htm

Back to our homepage at: www.eagerplastics.com

 

TELEPHONE NUMBER 773-927-3484

 

REVISION DATE 03/26/2014

 

********************************************************************

EMERGENCY OVERVIEW

********************************************************************

 

HMIS/NFPA HEALTH 3 FLAMMABILITY 1 REACTIVITY 0

 

PHYSICAL FORM Mobile liquid

 

COLOR Amber

 

ODOR Ammoniacal

 

HAZARDS Harmful if in contact with skin. Harmful if

swallowed. Corrosive to eyes. Corrosive to skin.

Severe eye irritant. Severe skin irritant. May

cause respiratory sensitization. May cause skin

sensitization.

 

EXTINGUISHING MEDIA Ignition will give rise to a Class B fire. In

case of large fire use: alcohol foam, water

spray. In case of small fire use: carbon dioxide

(CO2), dry chemical, dry sand or limestone.

********************************************************************

 

C.A.S. CHEMICAL NAME Mixture

 

SYNONYMS None

 

CHEMICAL FAMILY Aliphatic Amines

 

EMPIRICAL FORMULA Mixture

 

INTENDED USE Curing Agent, Epoxy

 

REVISION NOTES Updated European Information Updated

health hazard information. TARGET ORGANS

SIGNS AND SYMPTOMS OF EXPOSURE (Acute

effects) SIGNS AND SYMPTOMS OF EXPOSURE

(Possible Longer Term Effects) EEC RISK

PHRASES EEC SAFETY PHRASES

CHRONIC/SUBCHRONIC DATA Updated handling

and storage information.

 

 

-----------------------------------------------------------------------

SECTION 2 - INGREDIENTS

-----------------------------------------------------------------------

 

Num % CAS Number and Chemical Name

--- ------- ---------------------------------------------------------

1. >30.00 80-05-7 PHENOL, 4,4'-(1-METHYLETHYLIDENE)BIS-

2. <70.00 111-40-0 DIETHYLENETRIAMINE(DETA)

 

OSHA (ACGIH) EXPOSURE LIMITS

TWA STEL CEILING

ppm mg/m3 ppm mg/m3 ppm mg/m3

-------- -------- -------- -------- -------- --------

1. OSHA N/E N/E N/E N/E N/E N/E

ACGIH N/E N/E N/E N/E N/E N/E

-----------------------------------------------------------------------

2. OSHA 1.0000 4.0000 N/E N/E N/E N/E

ACGIH 1.0000 4.2000 N/E N/E N/E N/E Skin

 

N/E = Not Established.

 

-----------------------------------------------------------------------

SECTION 3 - HEALTH HAZARDS

-----------------------------------------------------------------------

 

ROUTES OF EXPOSURE

Eye Contact

Skin Contact

Ingestion

Skin Absorption

 

EXPOSURE STANDARDS

See Section 2 for exposure standards on ingredients. Maintain air

contaminant concentrations in the workplace at the lowest feasible

levels.

 

HEALTH HAZARDS

Harmful if in contact with skin.

Harmful if swallowed.

Corrosive to eyes.

Corrosive to skin.

Severe eye irritant.

Severe skin irritant.

May cause respiratory sensitization.

May cause skin sensitization.

 

TARGET ORGANS

Eye

Skin

Respiratory system

 

SIGNS AND SYMPTOMS OF EXPOSURE (Acute effects)

Burns of the eye may cause blindness. Contact of undiluted product

with the eyes or skin quickly causes severe irritation and pain

and may cause burns, necrosis and permanent injury.

Inhalation of aerosols and mists may severely damage contacted

tissue and produce scarring.

Product is absorbed through the skin and may cause malaise,

discomfort, injury and death unless treated promptly.

 

SIGNS AND SYMPTOMS OF EXPOSURE (Possible Longer Term Effects)

This substance may cause respiratory sensitization and chronic

lung toxicity to exposed workers.

Repeated and/or prolonged exposure may cause allergic

reaction/sensitization.

Repeated and/or prolonged exposures may result in: adverse

respiratory effects (such as cough, tightness of chest or

shortness of breath), adverse eye effects (such as conjunctivitis

or corneal damage), adverse skin effects (such as rash, irritation

or corrosion).

 

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE

Asthma

Chronic respiratory disease (e.g. Bronchitis, Emphysema)

Eye disease

Skin disorders and Allergies

 

CARCINOGENS UNDER OSHA, ACGIH, NTP, IARC, OTHER

This product contains no carcinogens in concentrations of 0.1

percent or greater.

 

-----------------------------------------------------------------------

SECTION 4 - FIRST AID

-----------------------------------------------------------------------

 

EYE CONTACT

Hold eyelids apart and immediately flush eyes with plenty of water

for at least 15 minutes. Seek medical advice.

 

SKIN CONTACT

Remove product and immediately flush affected area with water for

at least 15 minutes. Remove contaminated clothing and shoes.

Destroy contaminated leather apparel. Cover the affected area with

a sterile dressing or clean sheeting and transport for medical

care. Do not apply greases or ointments. Control shock, if

present. Launder contaminated clothing prior to reuse.

 

INHALATION

Move patient to fresh air. If breathing has stopped or is labored

give assisted respiration (e.g. mouth-to-mouth). Supplemental

oxygen may be indicated. Prevent aspiration of vomit. Turn

victim's head to the side. Seek medical advice.

 

INGESTION

In the event of ingestion, administer 3-4 glasses of milk or

water. Do not induce vomiting. Seek medical advice.

 

-----------------------------------------------------------------------

SECTION 5 - FIRE AND EXPLOSION DATA

-----------------------------------------------------------------------

 

FLASH POINT (closed cup) 102.78 C (217.00 F)

 

UPPER EXPLOSION LIMIT (UEL) No Data

LOWER EXPLOSION LIMIT (LEL) No Data

 

AUTOIGNITION TEMPERATURE No Data

FIRE HAZARD CLASSIFICATION (OSHA/NFPA)

Class IIIB

 

EXTINGUISHING MEDIA

Ignition will give rise to a Class B fire. In case of large fire

use: water spray, alcohol foam. In case of small fire use: carbon

dioxide (CO2), dry chemical, dry sand or limestone.

 

SPECIAL FIRE FIGHTING PROCEDURES

A face shield should be worn. Firefighters should wear butyl

rubber boots, gloves, and body suit and a self-contained breathing

apparatus.

Retain expended liquids from fire fighting for later disposal.

 

UNUSUAL FIRE AND EXPLOSION HAZARDS

May generate toxic or irritating combustion products.

Contact of liquid with skin must be prevented.

Sudden reaction and fire may result if product is mixed with an

oxidizing agent.

May generate carbon monoxide gas.

May generate toxic nitrogen oxide gases. May generate ammonia gas.

Personnel in vicinity and downwind should be evacuated.

 

-----------------------------------------------------------------------

SECTION 6 - ACCIDENTAL RELEASE MEASURES

-----------------------------------------------------------------------

 

CONTAINMENT TECHNIQUES (Removal of ignition sources, diking etc)

Stop the leak, if possible. Reduce vapor spreading with a water

spray. Shut off or remove all ignition sources. Construct a dike

to prevent spreading (includes molten liquids until they freeze).

 

CLEAN-UP PROCEDURES

If recovery is not feasible, admix with dry soil, sand or non-

reactive absorbent and place in an appropriate chemical waste

container. Transfer to containers by suction, preparatory for

later disposal. Flush area with water spray. Clean-up personnel

must be equipped with self contained breathing apparatus and butyl

rubber protective clothing. For large spills, recover spilled

material with a vacuum truck.

 

OTHER EMERGENCY ADVICE

Wear protective clothing, boots, gloves, and eye protection.

 

-----------------------------------------------------------------------

SECTION 7 - HANDLING AND STORAGE

-----------------------------------------------------------------------

 

STORAGE

Keep away from: acids, oxidizers. Keep in cool, dry, ventilated

storage and in closed containers. Store in steel containers

preferably located outdoors, above ground, and surrounded by dikes

to contain spills or leaks. Do not store in reactive metal

containers.

 

HANDLING

Avoid contact with skin or eyes. Avoid breathing of vapors. Handle

in well ventilated work space. When handling, do not eat, drink,

or smoke. Avoid using in any spray application without strict

conformance to all applicable electrical codes and the OSHA limit

for maximum allowable airborne concentrations.

 

OTHER PRECAUTIONS

Emergency showers and eye wash stations should be readily

accessible. Adhere to work practice rules established by

government regulations (e.g. OSHA). Do not use sodium nitrite or

other nitrosating agents in formulations containing this product.

Cancer-causing nitrosamines could be formed.

 

-----------------------------------------------------------------------

SECTION 8 - PERSONAL PROTECTION / EXPOSURE CONTROLS

-----------------------------------------------------------------------

 

EYE PROTECTION

Full face shield with goggles underneath.

 

HAND PROTECTION

Neoprene rubber gloves. Impermeable gloves. Cuffed butyl rubber

gloves. Nitrile rubber gloves.

 

RESPIRATORY PROTECTION

Not required under normal conditions in a well-ventilated

workplace. Under the following conditions a respirator may be

required: when product vapor concentration exceeds the limits

listed in section 2, during repair and cleaning of equipment,

during transfer or discharge of the product, sampling, spray

applications. Types of respirators that may be used include the

following: Chemical Cartridge Respirator with face piece to

protect against the organic vapor, Supplied air respirator with

full face piece, Self-contained breathing apparatus in pressure

demand mode. In emergency conditions use a self-contained

breathing apparatus in pressure demand mode.

 

PROTECTIVE CLOTHING

Impervious clothing. Slicker Suit. Rubber boots. Full rubber suit

(rain gear). Butyl or latex protective clothing.

 

ENGINEERING CONTROLS

Maintain air concentrations in work spaces in accord with

standards outlined in Sections 2 and 3.

 

WORK AND HYGIENIC PRACTICES

Provide readily accessible eye wash stations and safety showers.

Wash at the end of each workshift and before eating, smoking or

using the toilet. Promptly remove clothing that becomes

contaminated. Discard contaminated leather articles. Launder or

discard contaminated clothing.

 

-----------------------------------------------------------------------

SECTION 9 - TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

-----------------------------------------------------------------------

 

PHYSICAL FORM Mobile liquid

COLOR Amber

ODOR Ammoniacal

pH ALKALINE

VAPOR PRESSURE (mm Hg at 21C (70F)) <0.09774

VAPOR DENSITY (Air = 1) No Data

BOILING POINT >200.00 C (>392.00 F)

MELTING POINT No Data

SOLUBILITY IN WATER 1.40%

SPECIFIC GRAVITY (Water = 1) 1.03

MOLECULAR WEIGHT Mixture

 

-----------------------------------------------------------------------

SECTION 10 - STABILITY AND REACTIVITY

-----------------------------------------------------------------------

 

CHEMICAL STABILITY

Stable

 

CONDITIONS TO AVOID (if unstable)

Not applicable

 

INCOMPATIBILITY (Materials to Avoid)

Mineral acids (i.e. sulfuric, phosphoric, etc.). Organic acids

(i.e. acetic acid, citric acid etc.). Oxidizing Agents (i.e.

perchlorates, nitrates etc.). Reactive metals (i.e. sodium,

calcium, zinc etc.). Sodium or Calcium Hypochlorite. CAUTION! N-

Nitrosamines, many of which are known to be potent carcinogens,

may be formed when the product comes in contact with nitrous acid,

nitrites or atmospheres with high nitrous oxide concentrations.

Product slowly corrodes copper, aluminum, zinc and galvanized

surfaces. Reaction with peroxides may result in violent

decomposition of peroxide possibly creating an explosion.

Materials reactive with hydroxyl compounds. Nitrites, nitrosating

agents. A reaction accompanied by large heat release occurs when

the product is mixed with acids. Heat generated may be sufficient

to cause vigorous boiling creating a hazard due to splashing or

splattering of hot material.

 

HAZARDOUS DECOMPOSITION PRODUCTS (from burning, heating, or reaction

with other materials).

Nitrogen oxide can react with water vapors to form corrosive

nitric acid (TLV=2 ppm). Carbon Monoxide in a fire. Carbon Dioxide

in a fire. Ammonia when heated. Nitrogen Oxides in a fire.

Irritating and toxic fumes at elevated temperatures. Nitric acid

in a fire. nitrosamines. Aldehydes. The oxides of nitrogen gases

(except nitrous oxide) emitted on decomposition are highly toxic.

 

HAZARDOUS POLYMERIZATION

Will not occur

 

CONDITIONS TO AVOID (if polymerization may occur)

Not applicable

 

-----------------------------------------------------------------------

SECTION 11 - TOXICOLOGICAL PROPERTIES

-----------------------------------------------------------------------

 

 

ACUTE ORAL TOXICITY (LD50, RAT)

1080.00 mg/kg (Estimate)

 

ACUTE DERMAL TOXICITY (LD50, RABBIT)

1090.00 mg/kg (Estimate)

 

ACUTE INHALATION TOXICITY (LC50, RAT)

No Data

 

OTHER DATA

Data available on components only.

 

OTHER ACUTE EFFECTS

No Data

 

IRRITATION EFFECTS DATA

Irritation data based on estimates.

 

CHRONIC/SUBCHRONIC DATA

Component has caused skin and respiratory senstization in humans.

 

-----------------------------------------------------------------------

SECTION 12 - ECOLOGICAL INFORMATION

-----------------------------------------------------------------------

 

ECOTOXICITY

No Data

ENVIRONMENTAL FATE

No Data

ADDITIONAL INFORMATION

Waste from this product may present long term environmental

hazards, thus landfill disposal must be considered less acceptable

than incineration..

 

-----------------------------------------------------------------------

SECTION 13 - DISPOSAL CONSIDERATIONS

-----------------------------------------------------------------------

 

WASTE DISPOSAL

Comply with all Federal, State and Local Regulations.

 

-----------------------------------------------------------------------

SECTION 14 - TRANSPORT INFORMATION

-----------------------------------------------------------------------

 

DOT NON-BULK SHIPPING NAME Amines, liquid, corrosive, n.o.s.

(Diethylenetriamine) // 8 // UN2735 //

PG III

 

DOT BULK SHIPPING NAME Refer to Bill of Lading.

 

IMO SHIPPING DATA Refer to Bill of Lading.

 

ICAO/IATA SHIPPING DATA Amines, liquid, corrosive, n.o.s.

(Diethylenetriamine) // 8 // UN2735 //

III // Shipment per 49 CFR 171.11

 

-----------------------------------------------------------------------

SECTION 15 - REGULATORY INFORMATION

-----------------------------------------------------------------------

 

US FEDERAL REGULATIONS

 

TOXIC SUBSTANCES CONTROL ACT (TSCA)-

All components are included in the EPA Toxic Substances Control

Act (TSCA) Chemical Substance Inventory.

 

OSHA Hazard Communication Standard (29CFR1910.1200) hazard class(es)

Corrosive. Sensitizer.

 

EPA SARA Title III Section 312 (40CFR370) hazard class

Immediate Health Hazard. Delayed Health Hazard.

 

EPA SARA Title III Section 313 (40CFR372) toxic chemicals above "de

minimis" level are

PHENOL, 4,4'-(1-METHYLETHYLIDENE)BIS-

 

STATE REGULATIONS

 

PROPOSITION 65 SUBSTANCES (component(s) known to the State of

California to cause cancer and/or reproductive toxicity and subject

to warning and discharge requirements under the "Safe Drinking Water

and Toxic Enforcement Act of 1986")

None

 

NEW JERSEY TRADE SECRET REGISTRY NUMBER(S)

None

 

-----------------------------------------------------------------------

SECTION 16 - INTERNATIONAL REGULATIONS

-----------------------------------------------------------------------

 

CANADA

DSL

Included on Inventory.

WHMIS HAZARD CLASSIFICATION

Class D Division 2A, Class D Division 2B, Class E Corrosive,

WHMIS TRADE SECRET REGISTRY NUMBER(S)

None

WHMIS HAZARDOUS INGREDIENTS

DIETHYLENETRIAMINE(DETA)

PHENOL, 4,4'-(1-METHYLETHYLIDENE)BIS-

WHMIS SYMBOLS

Test tube/hand, Stylized T,

 

EUROPEAN ECONOMIC COMMUNITY (EEC)

EINECS/ELINCS MASTER INVENTORY

Included on EINECS inventory or polymer substance, monomers

included on EINECS inventory or no longer polymer.

EEC SYMBOL

CORROSIVE (C)

EEC RISK (R) PHRASES

May cause sensitization by inhalation and skin contact

(R42/43). Causes burns (R34).

EEC SAFETY PHRASES

Do not breathe vapors (S23V). In case of contact with eyes,

rinse immediately with plenty of water and seek medical

advice (S26). Wear suitable protective clothing, gloves and

eye/face protection (S36/37/39). In case of accident or if

you feel unwell, seek medical advice immediately (show the

label where possible) (S45).

AUSTRALIA

AICS

Included on Inventory.

JAPAN MITI

Included on Inventory.

PHILIPPINES PICCS

Included on Inventory.

KOREA ECL

Included on Inventory.

CHINA SEPA

Included on Inventory.

-----------------------------------------------------------------------

 

END OF DOCUMENT