3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

EP5345 Quick setting Epoxy Cures at Low Temperatures.

Other Products in this family:
EP5312 - Thin (low-viscosity), castable, laminating system with 50 minute pot life
EP5314 - Thicker (higher-viscosity) and stronger version of EP5312
EP5340 - Thin (low-viscosity), castable, laminating system with 20 min pot life & low toxicity
EP5342 - Thicker (higher-viscosity) and stronger version of EP5340
EP5345 - Same as EP5342, but will cure at temperature as low as 35°F.
EP5347 - Thinner (Lower Viscosity) version of EP3545

GENERAL DESCRIPTION: EP5345 is a room temperature cured, rigid, unfilled system characterized by rapid cure in thin sections. This system exhibits maximum chemical resistance and highest physical characteristics within its class. Curing can be achieved at a practical rate as low as 35°F, making it ideal for outdoor repairs of cracks in asphalt roads, cement sidewalks, driveways and metal structures such as iron, steel and aluminum. Other applications include tooling surface coats, electrical potting, cable splicing and casting small parts. Can also be used for fibreglass truck, boat and automobile repair in cold weather conditions. Because of high exotherm and high reactivity, epoxy thickness must not exceed ¼". Ideal wherever a hot fast system is required.

APPLICATIONS: Outdoor repair of concrete driveways, concrete sidewalks, asphalt streets and roads when weather conditions are cold. Electrical potting. Electrical insulation.

The resultant unreinforced epoxy has these properties:

Mix Ratio, by weight: 5R : 1A
Pot Life: 10 min (based on 100 grams at 72°F)
Cure Time: 1 - 2 hr
Viscosity, mixed: 5500 cps
Specific Gravity: 1.19
Hardness: 93 D
Linear Shrinkage: 1%
Maximum Use Temperature: 232°F
Tensile Strength: 11,800 psi
Compressive Strength: 16,500 psi
Flexural Strength: 18,900 psi
Cured Color: light amber

EP5345 is available in the following sizes:

Quart Kit (2-1/2 lb)
Gallon Kit (10 lb)
5 Gallon Kit (50 lb)
55 Gallon Drum Kit (550 lb)

Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Placing an Order | Versión español | E-mail Us

All content © copyright 2001 Eager Polymers and may not be republished without permission.