3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

EP84-0223 Filled Moderate-viscosity Electrical Potting Epoxy

GENERAL DESCRIPTION: EP84-0223 is a room temperature cured, rigid filled system with moderate viscosity. Applications are generally electrical potting. However, tooling and prototyping uses have been successful due to minimum shrinkage and excellent duplication of fine detail. EP84-0223 can be cast up to 3" thick. For thinner castings not exceeding ¾" thick use EP5356. Cured epoxy is extremely resistant to abrasion and is black in color. Special colors can be provided.

APPLICATIONS: Casting of abraison-resistant fixtures and nests for machining; electrical potting; anchoring bolts into concrete floors; leveling rough floors for machinery installation; inexpesnive alternative of tool steel for sizing gauges; production of surface plates.

The resultant unreinforced epoxy has these properties:

Mix Ratio, by weight: 7R:1A
Pot Life: 30 min at 70°F
Cure Cycle: 24 hr. 70°F
Viscosity, mixed: 3,000 cps
Cured Color: Opaque Black (Custom Color Upon Request)
Specific Gravity: 1.52
Hardness: 92 D
Linear Shrinkage: 0.8%
Heat Distortion Point: 200°F
Tensile Strength: 6,000 psi
Compressive Strength: 16,000 psi

EP84-0223 is available in the following sizes:

Quart Kit (3 lb 11 oz)
Gallon Kit (11 lb)
5 Gallon Kit (55 lb)
55 Gallon Drum Kit

Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Placing an Order | Versión español | E-mail Us

All content © copyright 2001 Eager Polymers and may not be republished without permission.