3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

Directions



Heading towards the Loop on 90/94 (The Kennedy):

Follow the signs to I55 (The Stevenson) Southbound. The exit ramp from 90/94 is on the right hand side directly after the exit for 18th Street.

Heading west on I55 (the Stevenson):

Exit Kedzie Ave South (take a left from the ramp). Conitinue for about 3 miles to 48th Place and take a right.

Heading east on I55 (the Stevenson):

Exit Pulaski Ave South (take a right from the ramp). Continue to 47th Street and take a left (heading east). Take this to Kedzie and take a right (heading south again) to 48th Place where you take another right.

Heading towards the Loop on the Dan Ryan:

Exit 51st Street West to Kedzie. Take a right and travel two blocks to 48th Place where you take a left. We are two blocks down on the right hand side of the street.

Parking

On the left side (West side) of the building is a short driveway leading to our loading dock and a sign that reads "No Parking" is posted. This parking area is reserved for Eager customers, so feel free to park there if it is available. Otherwise you will have to find street parking

Taking Public Transportation

Eager Plastics is two blocks away from the Orange Line 'L' Kedzie Stop. This line is accessible from anywhere within the Loop and runs to Midway Airport. As you exit the station, follow the sidewalk to the left, where it leads to the CTA parking lot. Walk through the parking lot to the street and take a left and go two blocks to our store. For a map of the 'L' Orange Line to our showroom, follow this link to a CTA map.
This detailed and zoomable map courtesy of MapQuest should also help you figure the best route to use.

Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Payment Options | Versión español | E-mail Us

All content © copyright 2001 Eager Plastics, Inc. and may not be republished without permission.