3350 W. 48^th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.

Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

Eager Plastics's FOAM-iT Series consists of two-component rigid foams that are versatile and easy to use. FOAM-iT products are available in 3lb., 5 lb. or 15 lb. per cubic foot densities. Parts A + B are mixed in equal amounts by volume (1A: 1B) and are poured into a mold or other form (apply release agent if necessary). Mixture will expand many times original volume (depending on which FOAM-iT product you are using) and develop a uniform cell structure. Foam becomes tack free in about 4 - 6 minutes, develops handling strength in 20 minutes and fully cures in 2 hours.

FOAM-iT products are premium foams that are very strong and durable. They can be pigmented and are used for a variety of art/craft, industrial design and special effect applications. FOAM-iT can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. FOAM-iT 15 can be cast and used as a carvable prototype modeling medium. FOAM-iT! can also be pigmented. If your application calls for flexible foam, try FlexFoam-It. It is a premium flexible foam that is strong and resists tearing and compression set.

FOAM-iT is available from Eager Plastics in the following sizes:

2 Pint Kit
2 Gallon Kit
10 Gallon Kit
110 Gallon Kit