3350 W. 48^th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.

Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

FlexFoam-iT V and FlexFoam-iT X are two-component flexible foams that are versatile and easy to use. Parts A + B are mixed in equal amounts by volume and poured into a mold or other form (apply release agent if necessary). FlexFoam-iT V expands 10 times its original volume and develops a uniform 5 lb./cu. ft. cell structure. FlexFoam-iT X expands 6 times its original volume and develops a uniform 10 lb./cu. ft. cell structure. Foam expands to full volume in 5 minutes, develops handling strength in 30 minutes and fully cures in two hours. Vibrant colors can be achieved by adding color pigments.

Flex-Foam-It can be used for a variety of arts & crafts, industrial and special effects applications including padding/cushion material, gasket material and scenic design. These foams are closed-cell, and thus do not absorb liquid such as water. If you need a rigid foam, see our product EP4202.

FlexFoam-It is available from Eager Plastics in the following sizes:

2 Pint Kit
2 Gallon Kit
10 Gallon Kit
110 Gallon Kit