3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

EP9009 Liquid Plasticizing Agent


GENERAL DESCRIPTION: EP9009 is a blend of plasticizers which when added to other Eager Plastics systems modifies the final cured properties of the system. Generally, when the amount is in the 10% to 20% range, the effect is a tougher, more resilient cured plastic. When higher amounts are used, the result has increased flexibility. The more EP9009 that is added to the system, the more flexible the final result. The correct amount is generally arrived at through experimentation. EP9009 has proven to be compatible with polyesters, epoxies and polyurethanes.

TYPICAL PROPERTIES
Appearance: Clear oily liquid
Color: Light straw color, APHA 60
Odor: Mild ester, practically odorless
Viscosity at 25C: Brookfield #2 @ 60 rpm 100 cps
Specific Gravity at 25C: 1.12
Density, lb/gal at 25C: 9.346
Moisture Content (wt. %): less than 0.07
Refractive Index: 1.5282
Boiling Point @ 25mm Hg: 232C
Flash Point, COC: 390F(199C)
Dielectric Constant, @ 60 Hz: 7.6
Volume resistivity, Ohm cm2/cm 1x1010

Eager Plastics offers EP9009 in the following sizes: Pints, Quarts, Gallons, 5 Gallon Pails & 55 Drums.



Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Payment Options | Versión español | E-mail Us


All content © copyright 2001 Eager Plastics, Inc. and may not be republished without permission.