3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

Silicone Pattern Release

Ease Release 200 is an easy to use aerosol spray pattern release agent. It should be used as a release coating for patterns and models to prepare for pouring of a silicone rubber mold. A thin film of pattern release will ease the parting during pouring of a two-part part silicone mold and prevent the freshly poured silicone from adhering to the cured silicone.

Based on a unique blend of vaseline and solvents, this spray can be used on a wide variety of pattern materials including wood, epoxy, vulcanized silicone rubber, urethanes, polyesters, polystyrene, phenolics, acrylics, vinyls, polypropylene, rubber, clay, plaster, glass and metals.

Apply a liberal coat on the original pattern or half-shell of cured silicone. It will dry instantly with no buffing needed. Excellent detail can be achieved with fine-grained woods. It will not inhibit cure of silicone rubber. Using Eager Plastics' Pattern Release will allow for improved, more effincient moldmaking practices.



Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Placing an Order | Versión español | E-mail Us


All content © copyright 2005 Eager Polymers, Inc. and may not be republished without permission.