3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

Eager Polymers Release Agents

ER200 - General purpose casting release agent. Great for releasing epoxy and urethane from silicone, urethane or metal molds. Spray on.

ER205 - Bulk liquid version of ER200. Pourable, brushable.

ER500 - Dry release agent. Easily wipes off pieces to facilitate post-casting processes such as painting. Spray on.

ER200 - Aerosol spray for release of silicone from original pattern. Used for parting molds to separate silicone from itself in two piece molds. Spray on.

ER2310 (AKA Supersealer) - Seals porous surfaces such as cement, concrete and plaster. Easily washes away after mold is made. Thin bulk liquid applied by brushing on. Can also be used as a non-silicone, no build-up release agent.

ER2320 - Release agent for casting concrete and cement.

PVA - Extra barrier for polyester casting. Can be applied on top of wax. Great for releasing latex and brush-on urethanes from sealed wood, plaster, cement or clay originals. Brushable.

Universal Mold Release - Aerosol spray separates silicone from silicone during parting mold production and also urethane castings from silicone molds during casting.

White Mold Release Wax - Paste wax used to rub on metal or glass molds. Several layers can be applied and buffed out, leaving an extremely smooth mold surface to eliminate post-casting polishing and finishing.

Dry Gas Spray - This dry gas blanket prevents moisture contamination of open containers of liquid urethane rubbers, plastics, paints, coatings and other products.



Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Placing an Order | Versión español | E-mail Us


All content © copyright 2006 Eager Polymers, Inc. and may not be republished without permission.