3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting urethanes, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

Liquid Silicone Shelf Life and Cured Mold Storage Life



The shelf life for the separate components of a liquid silicone kit is approximately 6 months. We say 6 months to be on the safe side, but we have had cleints who have used liquid silicone up to 10 years old and were still able to get it to cure! The base rubber will last for much longer, but the activator loses its strength over time and may have to be replaced to get the system to cure. Eager Plastics offers replacement containers for each type of silicone that we sell. Both tin-based and platinum-based silicone systems behave similiarly.

Once a mold had been made, its "library life" depends on the type of catalyst that was used. Tin based systems (e.g., RTV1000, RTV325) will probably last about 5 years if kept in a clean storage area. Beyond that, it will become brittle and crack upon releasing the casting. If you suspect that a mold is very old, you can always use your last casting to make a new mold.

Platinum-catalysed silicones (e.g., P50, P90, RTV862) have a much longer library life, up to 20 years or longer.

The lifetime of a mold (how many castings you can get before you lose details or the mold begins to tear) really depends on what you are casting, how many castings you have made and if you use a release agent or not.



Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Placing an Order | Versión español | E-mail Us


All content © copyright 2001 Eager Plastics, Inc. and may not be republished without permission.