3350 W. 48th Pl. Chicago, IL 60632-3000. Phone 773-927-3484, FAX 773-650-5853.
Source for liquid thermosets: silicones, moldmaking urethanes, casting plastics, polyester resins, epoxy.
Fiberglass fabrics, release agents, fillers and dyes.
All products available in small quantity.

Universal Mold Release Aerosol Can

Universal Mold ReleaseAgent is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Eager Plastics ER2310 SuperSeal or other sealer may be necessary. If using silicone rubber, seal model surface with ER2310 only. Do not use UMR.

UMR also easily releases a variety of casting materials (epoxies, Eager Plastics liquid plastics, etc.) from cured rubber molds. Properly used, Universal Mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold.

UMR is available in aerosol spray or economical liquid form (one gallon, 5 gallon and 55 gallon drum).

Eager Home | Catalog | Moldmaking Silicone | Flexible Urethane | Casting Plastic | Pigments & Dyes | Epoxy
Fiberglass Fabric & Polyester Resin | Fillers & Powders | Release Agents | MSDS | FAQ | How-to Books
Finished Product Examples | Shipping Options | Placing an Order | Versión español | E-mail Us

All content © copyright 2001 Eager Plastics, Inc. and may not be republished without permission.